References:

Adietta, G., and Pietra, L.D., 2002, The squeeze Film Damper over four decades of investigations. Part II: Rotordynamic analyses with rigid and flexible rotors. The Shock & Vibration Digest, 34(2), 97-126.
Admas, M.L. Jr, 2001, Rotating Machinery Vibration, Marcel Dekker, Inc., New York.
Changsen, W., 1991, Analysis of Rolling Element Bearings, Mechanical Engineering Publications Ltd., London.
Childs, D.W., 1993, “Turbomachinery Rotordynamics: Phenomena, Modeling and Analysis”, John Wiley & Sons, Inc., New York.
Pietra, L.D., and Adietta, G., 2002, The squeeze Film Damper over four decades of investigations. Part I: Characteristics and operating features. The Shock & Vibration Digest, 34(1), 3-26.
El-Sayed H. R., 1980, Wear, 63, 89-94.Stiffness of deep-groove ball bearing.
Eschmann, P., Hasbargen, I. and Weigand, K., (1985), Ball and Roller Bearings, Theory, Design and Application. John Wiley and Sons:New York.
Gargiulo E.P., 1980, Machine Design, 52, 107-110. A simple way to estimate bearing stiffness.
Hamrock, B.J., 1994, Fundamentals of Fluid Film Lubrication, McGraw-Hill International Editions, Mechanical Engineering Series, New York, USA.
Harris, T.A., 2001, Rolling Bearing Analysis, Wiley, New York.
Hertz, H., (1896), Miscellaneous Papers, Macmillan, London, 163-183. On the contact of rigid elastic solids and on hardness.
Hummel, C., 1926, “Kristische Drehzahlen als Folge der Nachgiebigkeit des Schmiermittels im Lager,” VDI-Forschungsheft, 287.
Johnson. T.L., 1991, Contact Mechanics, 2nd edition, McGraw-Hills, New York.
Jones, A.B., 1946, Analysis of Stresses and Deflections, New Departure Engineering Data, Briston.
Jones A.B., 1960, Transactions of ASME, Journal of Basic Engineering, 309-320, A general theory for elastically constrained ball and radial roller bearings under arbitrary load and speed conditions.
Krämer E., 1993, “Dynamics of Rotors and Foundations,” Springer-Verlag, New York.
Kashyap R. and Tiwari R., 2006, Prediction of Heat Generations and Temperature Distributions at Critical Contact Zones of High-Speed Rolling Bearings, Proceedings of 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, January 4-6, 2006, IIT Guwahati.
Lim, T. C. and Singh, R., (1990a), Journal of Sound and Vibration 139 (2), 179-199. Vibration Transmission Through Rolling Element Bearings, Part I: Bearing Stiffness Formulation.
Lim, T. C. and Singh, R., (1990b), Journal of Sound and Vibration 139 (2), 201-225. Vibration Transmission Through Rolling Element Bearings, Part II: System Studies.
Lim, T. C. and Singh, R., (1991), Journal of Sound and Vibration 151 (1), 31-54. Vibration Transmission Through Rolling Element Bearings, Part III: Geared Rotor System Studies.
Lim, T. C. and Singh, R., (1992), Journal of Sound and Vibration 153 (1), 37-50. Vibration Transmission Through Rolling Element Bearings, Part IV: Statistical Energy Analysis.
Lim, T. C. and Singh, R., (1994), Journal of Sound and Vibration 169 (4), 547-553. Vibration Transmission Through Rolling Element Bearings, Part V: Effect of Distributed Contact Load on Roller Bearing Stiffness Matrix.
Newkirk, B.L., 1924, “Shaft Whipping,” General Electric Review, pp. 169.
Newkirk, B. L. and Taylor, H.D., 1925, “Shaft Whipping due to Oil Action in Journal Bearing," General Electric Review, 559-568.
Palmgren, A., (1959), Ball and Roller Bearing Engineering, 3rd ed., Burbank.
Petroff, N.P., 1883, Inzh. Zh. St. Petersburg, vol. 1, pp. 71-140; vol. 2, pp. 227-279; vol. 3, pp. 377-436; vol. 4, pp. 535-564. Friction in Machines and the effect of the lubricant.
Pinkus, O. and Sternlicht, B., 1961, Theory of Hydrodynamic Lubrication. , McGraw-Hill Book-Company, New York.
PSG, 1982, Design Data, Faculty of Mechanical Engineering, PSG College of Technology, Coimbatore, DPV Printers, Coimbatore, India.
Ragulskis, K. M., Jurkauskas, A. Yu., Atstupenas, V. V., Vitkute, A. Yu., and Kulvec, A. P., (1974), Vibration of Bearings. Vilnyus: Mintis Publishers.
Rao, J. S., 2000, “Vibratory Condition Monitoring of Machines,” Narosa Publishing House, New Delhi.
Reynolds, O., 1886, Phil. Tran. Royal Society, A, Vol. 177, 157-234. On the theory of lubrication and its application to mr. beauchamp tower's experiments, including an experimental determination of the viscosity of olive oil.
San Andres, L., and Vance, J. M., 1987, ASLE Transactions, 30(3), 384-393. Effect of fluid inertia on finite length squeeze-film dampers.
Schweitzer, G., Bleuler, H. and Traxler, A., 1994, Active Magnetic Bearing: Basics, Properties and Application of Active Magnetic Bearings. Vdf Hochschulverlag AG an der ETH, Zürich.
Smith, D.M., 1969, Journal Bearings in Turbomachinery, Chapman and Hall, London.
Stodola, A., 1925, “Kritische Wellenstörung infolge der Nachgiebigkeit des Ölpolslers im Lager (Critical shaft perturbations as a result of the elasticity of the oil cushion in the bearings),” Schweizerische Bauzeitung, Vol. 85, No. 21, May.
Stolarski, T. A., (1990), Tribology in Machine Design. Oxford: Heinemann Newnes.
Tiwari, R., and N. S. Vyas, 1995, Journal of Sound and Vibration, 187 (2), 229-239. Estimation of Non-Linear Stiffness Parameters of Rolling Element Bearings from Random Response of Rotor-Bearing Systems.
Tiwari, R., Lees, A.W. and Friswell, M.I., 2004, Identification of dynamic bearing parameters: a review, The Shock & Vibration Digest, 36(2), 99-124.
Tiwari, R., Manikandan, S. and Dwivedy, S.K., 2005,The Shock & Vibration Digest 37(3), 261-284.  A Review on the Experimental Estimation of the Rotor Dynamic Parameters of Seals.
Timoshenko, S. and Goodier, J., 1951, Theory of Elasticity, 2nd edition, McGraw-Hills, New York.
Tichy, J. A., and Modest, M., 1978, ASME Journal of Lubrication Technology, 100, 323-330. Squeeze-film in arbitrary shaped journal bearings subject to oscillations.
Tao, L., Diaz, S., San Andres, L., and Rajagopla, K. R., 2000, 122(1), 205-210. ASME Journal of Tribology. Analysis of squeeze film dampers operating with bubbly lubricants.
Tower, B., 1883, Proc. Inst. Mech. Eng., Nov. pp 632-659; 1884 Jan. pp. 29-35. First report on friction experiments (Friction of lubricated bearing).
Tower, B., 1885, Proc. Inst. Mech. Eng., pp 58-70. Second report on friction experiments (Experiments on the oil pressure in a bearing).
Vance, J.M., 1988, “Rotordynamics of Turbomachinery”, John Wiley & Sons   Inc, New York.
Zeidan, F. Y., San Andres, L. A., and Vance, J. M., 1996, Proceedings of the Twenty-fifth Turbomachinery Symposium, Vol. 2518. Design and application of squeeze film dampers in rotating machinery.