|
Series Connected Devices like fixed, switched or controllable series reactance compensators can also be used for reactive power control. While the basic aim of connecting series capacitors is for power flow control and enhancement (to be discussed later), they also affect the voltage profile in a system.
Tap Changing Transformers provide a means of controlling voltage and reactive power flows in a system. Typically, all generator step-up transformers and auto-transformers (which inter-connect EHV lines which are at different voltage levels) are provided with a facility for on-load tap changing. The change of tap is effected by motors and follows a manual command or the output of an automatic voltage regulator (as in a generator). Tap changing is a slow process and there are several inherent and deliberate delays and dead-bands in the control system to avoid frequent changes in tap. Tap changing can also be effected by power electronic switches.
A schematic of a tap changing transformer scheme is shown in the figure below. 
|