References

1. Abu-Hassanein, Z. S. (1994) “Use of electrical resistivity measurement as a quality control tool for compacted clay liners”, M. S. Thesis, University of Wisconsin, Madison.
2. Anatoly, P. and Larisa, P. (2002) “Electrical field and soil properties”, 17th WCSS, August, Thailand, pp. 1558-1-1558-11, www.landviser.com/.../17WorldCongress%20of%20Soil%20Science.pdf, (website accessed on 18-11-2011).
3. Arulanandan, K. (1991) "Dielectric method for prediction of porosity of saturated soil, Journal of Geotechnical Engineering, ASCE, Vol. 117, No. 2, pp. 319-330.
4. ASTM C 177 (2010) “Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus”, Annual Book of ASTM Standard, ASTM International, West Conshohocken, USA.
5. ASTM C 518 (2010). “Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus”, Annual Book of ASTM Standard, ASTM International, West Conshohocken, USA.
6. ASTM D 3974-81 (1994) “Standard practices for extraction of trace elements from sediments”, Annual Book of ASTM Standards, 04.08, ASTM International, West Conshohocken, PA, USA.
7. ASTM D 5334 (2000) “Determination of thermal conductivity of soil and soft rock by thermal needle probe procedure”, Annual Book of ASTM Standard, ASTM International, West Conshohocken, USA.
8. Chu, C-A. (2009) “Measurement and modeling for thermal conductivity of geomaterials”, Ph. D. Thesis submitted to Department of Civil Engineering, National Central University, Taiwan. URL: thesis.lib.ncu.edu.tw/ETD-db/ETD-search-c/getfile?URN...pdf (website visited on 6-4-2012).
9. Cooke, B. and Mitchell, R. J. (1991) “Physical modelling of a dissolved contaminant in an unsaturated sand”, Canadian Geotechnical Journal, Vol. 28, pp. 829-833.
10. Dean, J. R. (2003) “Methods for environmental trace analysis”, John Wiley and Sons Ltd., England.
11. Fam, M. A., and Santamarina, J. C. (1997) “A study of consolidation using mechanical and electromagnetic waves”, Geotechnique, Vol. 47, No.2, pp. 203-219.
12. Fang, H-Y. and Daniels, J. L. (2006) “Introductory geotechnical engineering: An environmental perspective”, Routledge, Taylor and Francis, New York, USA.
13. Halvorson, A. D., Rhoades, J. D. and Reule, C. A. (1977) “Soil-four electrode conductivity relationships for soils of the northern great plains”, Soil Science Society of America Journal, Vol. 41, pp. 966-971.
14. IS 2720, Part II, (1973) “Methods of Test for Soils: Determination of water content”, Indian Standards Institute, New Delhi, India.
15. Jackson, R. D. and Taylor, S. A. (1965) "Heat transfer. in methods of soil analysis. Part 1. Agronomy, Vol. 9 (Black C A ed.), pp. 349-356.
16. Larisa P. (1999) “Electrical properties of soils”, Ph. D. thesis submitted to the department of renewable resources, University of Wyoming, Laramie, WY.
17. Lee, J., Oh, M., Park, J., Ahn, K. H. and Kim, H. (2002) “Application of dielectric constant for estimating moisture content and contamination in sand”, Second Japan-Korea Joint Seminar on Geoenvironmental Engineering, pp. 75-82.
18. Maturi, K., Khodadoust, A. P. and Reddy, K. R. (2008) “Comparison of extractants for removal of lead, zinc and phenanthrene from a manufactured gas plant field soil”, Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, ASCE, Vol.12, No. 4, pp.230-238.
19. Method 3050B, EPA “Acid digestion of sediments, sludges and soils”, http://www.epa.gov/osw/hazard/testmethods/sw846/pdfs/3050b.pdf (website accessed on 16-11-2011).
20. Rao, B. H., Bhat, A. M., and Singh, D. N. (2007) “Application of impedance spectroscopy for modeling flow of ac in soils”, Geomechanics and Geoengineering: An International Journal, Vol. 2, No. 3, pp. 197-206.
21. Reddy, K. R. and Chintamreddy, S. (2001) “Assessment of electrokinetic removal of heavy metals from soils by sequential extraction analysis”, Journal of Hazardous Material, Vol. 84, No. 2-3, pp. 279-296.
22. Rhoades, J. D. and Schilfgaarde, J. V. (1976) “An electrical conductivity probe for determining soil salinity”, Soil Science Society of America Journal, Vol. 40, pp. 647-650.
23. Shah, P. H. and Singh, D. N. (2004) “A simple methodology for determining electrical conductivity of soils”, Journal of ASTM International, Vol. 1, No. 5, published on line, 11 Pages.
24. Shah, P. H. and Singh, D. N. (2005) “Generalized Archie’s law for estimation of soil electrical conductivity”, Journal of ASTM International, Vol. 2, No. 5, published on line, 20 Pages.
25. Singh, D. N. and Gupta, A. K. (2000) “Permeability modeling in a small centrifuge”, Canadian Geotechnical Journal, Vol. 37, No. 5, pp. 1150-1155.
26. Smith-Ross, R. L. (1933) “Electrical properties of soils for alternating currents at radio frequencies” Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character,  The Royal Society, Vol. 140, No. 841, pp. 359-377, http://www.jstor.org/stable/95996 (website visited on 20-1-2012).
27. Sreedeep, S., Reshma, A. C. and Singh, D. N. (2004) "Measuring soil electrical resistivity using a resistivity box and a resistivity probe” Journal of Testing and Evaluation, ASTM, Vol. 27, No.4, pp. 411-415.
28. Taylor, R. N. (1995) “Centrifuges in modelling: principles and scale effects”, Geotechnical Centrifuge Technology, Taylor (ed.), Blackie Academic and Professional, Glasgow, pp. 19-33.
29. Topp, G. C., Davis, J. L. and Annan, A. P. (1980) “Electromagnetic determination of soil water content: Measurements in coaxial transmission lines”, Water Resour. Res. Vol. 16, pp. 574–582.
30. Zhang, R. (1997) “Determination of soil sorptivity and hydraulic conductivity from the disk infiltrometer”, Soil Science Society of America Journal, Vol. 61, pp. 1024-1030.
31. http://www.soilmoisture.com/operating.html (website visited on 4-1-2012).
32. http://www.decagon.com/products/lysimeters-and-infiltrometers/mini-disk-tension-infiltrometer/ (website visited on 4-1-2012).