All liquids have a tendency to evaporate when exposed to a gaseous atmosphere. The rate of evaporation depends upon the molecular energy of the liquid which in turn depends upon the type of liquid and its temperature. The vapour molecules exert a partial pressure in the space above the liquid, known as vapour pressure. If the space above the liquid is confined (Fig. 2.5) and the liquid is maintained at constant temperature, after sufficient time, the confined space above the liquid will contain vapour molecules to the extent that some of them will be forced to enter the liquid. Eventually an equilibrium condition will evolve when the rate at which the number of vapour molecules striking back the liquid surface and condensing is just equal to the rate at which they leave from the surface. The space above the liquid then becomes saturated with vapour. The vapour pressure of a given liquid is a function of temperature only and is equal to the saturation pressure for boiling corresponding to that temperature. Hence, the vapour pressure increases with the increase in temperature. Therefore the phenomenon of boiling of a liquid is closely related to the vapour pressure. In fact, when the vapour pressure of a liquid becomes equal to the total pressure impressed on its surface, the liquid starts boiling. This concludes that boiling can be achieved either by raising the temperature of the liquid, so that its vapour pressure is elevated to the ambient pressure, or by lowering the pressure of the ambience (surrounding gas) to the liquid's vapour pressure at the existing temperature.
Figure 2.5 To and fro movement of liquid molecules from an interface in a confined space as a closed surrounding
End of Lecture 2!
To view the exercise problem, click next button or select from left-hand-side.
