Knitting Technology (MCQ : MODULE - 10)

Question 1: Net on tricot machine can be generated by

Part set threading with unequal number of yarns in guide bars
Part set threading with greater underlap in back bar
Part set threading with suitable direction and magnitude of underlap in respective guide bars
Part set threading with greater underlap in front bar

Question 2: Net on Raschel can be produced on a two-bar machine by

Choosing pillar stitch on back bar and inlay with no overlap on front bar
Choosing pillar stitch on back bar and inlay with no underlap on front bar
Choosing pillar stitch on front bar and inlay with no underlap on back bar
Choosing pillar stitch on front bar and inlay with no overlap on back bar

Question 3 : Combination of pillar and miss-lapped structure makes the fabric

Very thin, light and stable
Exhibit very high modulus in length direction
Exhibit very high modulus in both length and width directions
Exhibit very high strength in length direction

Question 4 : Magazine weft insertion system can be employed on

A tricot machine
A single bed Raschel machine
A double bed Raschel machine

Question 5 : Match the pairs

A.Isotropic and high modulus warp knit	1. Double bed Raschel with points
B.Warp knit with piles	2. Double bed Raschel
C.Warp knit with plush	3. Weft inlay with miss-lapped and inlaid threads
D.Spacer fabric	4.Double bed Raschel with knife

(A2, B4, C1, D3)
(A4, B1, C2, D3)
(A1, B2 C4, D3)
(A3, B1 C4, D2)

Check Score