Module 3: Velocity Measurement
  References
 
  • Adrian, R. J. and  Yao, C. S., (1985), Pulsed Laser Technique Application to Liquid and Gaseous Flows and the Scattering Power of Seed Materials, Applied Optics, Vol.24, No. 1, pp. 44-52.
  • Adrian, R. J., (1986), Multi-point Optical Measurements of Flow Simultaneous Vectors in Unsteady Flow - a Review, Int. J. Heat and Fluid flow, Vol. 7, No.2, pp. 127-145.
  • Adrian, R. J., (1997), Dynamic Ranges of Velocity and Spatial Resolution of Particle Image Velocimetry,  Meas. Sci. Techonol., Vol. 8, pp. 1393-1398.
  • Atta, C. W. V., (1987), Ordered and Chaotic Vortex Streets Behind Circular Cylinders at Low Reynolds Numbers, J. Fluid Mech., Vol. 174, pp. 113-133.
  • Antonia, R. A. and Rajagopalan, S., (1990), Determination of Drag of a Circular Cylinder, AIAA Journal, Vol. 28, No. 10, pp. 1834-1835.
  • Abrahamson, S. and Lonnes, S., (1995), Uncertainty in Calculating Vorticity from 2D Velocity Fields Using Circulation and Least-Square Approaches, Expt. Fluids, Vol. 20, pp. 10-20.
  • Antonia, R. A. and Rajagopalan, S., (1989), Determination of Drag of a Circular Cylinder, AIAA Journal,Vol. 28, No. 10, pp. 1833-1834.
  • Blackwelder, R. F., Liu, D. and Jeon W., (1998), Velocity Perturbations Produced by Oscillating Delta Wing Actuators in the Wall Region, Expt. Thermal and Fluid Science, Vol. 16, pp. 32-40.
  • Boillot, A. and Prasad, A. K., (1996), Optimization Procedure for Pulse Separation in Cross-Correlation PIV, Expt. Fluids, Vol. 21, pp. 87-93.
  • Belmont, M. R. and Jordon, S. P. V., (2000), Generalised Cross-Correlation Functions for Engineering Applications: Application to Experimental Data, Expt. Fluids, Vol. 29, pp. 461-467.
  • Blackburn, H. and Henderson, R., (1996), Lock-in Behavior in Simulated Vortex Induced Vibration, Expt. Thermal and Fluid Science, Vol.12, pp. 184-189.
  • Bearman, P. W. (1984), Vortex Shedding from Oscillating Bluff Bodies, Annu. Rev. Fluid Mech., Vol.16, pp. 195-222.
  • Berger, E. (1967), Suppression of Vortex Shedding and Turbulence behind Oscillating Cylinders, The Physics of Fluids supplement, Vol. 10, pp. S191-S193.
  • Blackburn, H. M. and Henderson, R. D., (1999), A Study of Two-Dimensional Flow Past an Oscillating Cylinder, J. Fluid Mech., Vol. 385, pp. 255-286.
  • Chew, Y. T. and  Simpson, R. L., (1988), An Explicit Non-Real Time Data Reduction Method of Triple Sensors Hot-Wire Anemometer in Three-Dimensional Flow, ASME J. Fluids Engg., Vol. 110, pp. 110-119.
  • Chua, L. P., Li, H. S. and  Zhang, H., (2000), Calibration of Hot-Wire for Low Speed Measurements, Int. comm. Heat Mass Transfer, Vol. 27, No. 4, pp. 507-516.
  • Chen, Y. and Chwang, A. T., (2003), Particle Image Velocimetry System with Self-Organized Feature Map Algorithm, ASCE J. Engg. Mech., No. 10, Vol. 129, pp. 1156-1163.
  • Chang, L. and Hsieh, S. C., (2003), Convection Velocity of Vortex Structures in the Near Wake of a Circular Cylinder, ASCE J. Engg. Mech., Vol. 129, No. 10, pp. 1108-1118.
  • Durao, D. F. G., Heitor, M. V. and Pereira, J. C. F., (1988), Measurements of Turbulent and Periodic Flows Around a Square Cross-Section Cylinder, Expt. Fluids, Vol. 6, pp. 298-304.
  • Deaconu, S. and  Coleman, H. W., (2000), Limitations of Statistical Design of Experimental Approaches in Engineering Testing, Transaction ASME J. Fluid Engg., Vol. 122, pp. 254-259.