References

• http://www.astm.org/ABOUT/overview.html
  
  
• P T Curtis (Eds.), CRAG Test Methods for the Measurement of the Engineering Properties of Fibre Reinforced Plastics, Royal Aircraft Establishment, Technical Report 88012, February 1988.
  
  
• http://www.cmh17.org/
  
  
• M E Tuttle and H F Brinson, Resistance Foil Gauge Technology as Applied to Composite Materials, Report No. VPI-E-83-19, Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA, June 1983.
  
  
• Mechanical Testing of Advanced Fibre Composites. JM Hodgkinson (Eds). CRC Press, Woodhouse Publishing Limited, Cambridge, 2000.ASTM D4762-08, Standard Guide for Testing Polymer Matrix Composite Materials. http://www.astm.org/Standards/D4762.htm.
  
  
• ASTM D3039/D3039M-08, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. http://www.astm.org/Standards/D3039.htm.
  
  
• ASTM D695, Standard Test Method for Compressive Properties of Rigid Plastics. http://www.astm.org/Standards/D695.htm.
  
  
• ASTM D3410/D3410M, Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading. http://www.astm.org/Standards/D3410.htm.
  
  
• ASTM D3518/D3518M, Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 45 Laminate. http://www.astm.org/Standards/D3518.htm.
  
  
• ASTM D4255/D4255M, Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method. http://www.astm.org/Standards/D4255.htm.
  
  
• ASTM D7078/D7078M, Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method. http://www.astm.org/Standards/D7078.htm.
  
  
• ASTM D3479/D3479M, Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials. http://www.astm.org/Standards/D3479.htm.
  
  
• I De Baere, W Van Paepegem, J Degrieck, Design of a modified three-rail shear test for shear fatigue of composites, Polymer Testing, Vol. 27(3), 2008, pp 346-359.
  
  
• Space Simulation, Aerospace and Aircraft, Composite Materials, ASTM Vol. 15.03.
  
  
• JM Hodgkinson, Mechanical Testing of Advanced Fibre Composites, Woodhead Publishing Limited, Cambridge, England, 2000.
  
  
• DF Adams, Test methods for mechanical properties in Comprehensive Composite Materials, Vol. 5: Test Methods, Nondestructive Evaluation and Smart Composites, Pergamon, 2000.
  
  
• GH Staab, Laminar Composites, Butterworth-Heinemann, Elsevier, 1999.
  
  
• NE Dowling, Mechanical Behavior of Materials, Engineering Methods for Deformation, Fracture and Fatigue, Third Edition.
  
  
• BW Rosen, A simple procedure for experimental determination of the longitudinal shear modulus of unidirectional composites, Jl. Composite Materials, Vol. 6(4), 1972, pp 552-554.
  
  
• N Iosipescu, New accurate procedure for single shear testing of metals, Journal of Materials, Vol. 2(3), 1967, pp 537–66.
  
  
• HW Jr. Bergner, JG Jr. Davis, CT Herakovich, Analysis and shear test method for composite laminates, VPI-E77-14, Virginia Tech, Blacksburg, 1977.